Cutting Machine Maintenance Guide: Extend Equipment Life and Improve Performance

As technology advances and industries continue to evolve, machinery is constantly being upgraded and improved. However, purchasing a brand-new machine often requires a significant investment. So, how can you continue meeting production demands without disrupting operations or incurring excessive costs? The answer lies in proper daily maintenance. Regular maintenance helps reduce component wear, maintain cutting accuracy, ensure stable machine performance, and significantly extend the service life of the equipment. So, how can you minimize wear and tear, maintain the precision of your cutting machine, and maximize its lifespan?

Let's take theCHM1400 High-Speed Roll Paper Cutting MachinefromCHM Machineryas an example.

1.Slitting Knife ✅

Maintenance: Remove scale and debris, then apply lubricating oil.

Maintenance Frequency: Once per month.

Notes: Upper and lower slitting knives.

2.Electrical Components Exterior ✅

Maintenance: Clean dust and remove dirt deposits

Frequency: Once every 3 months

Notes: All electrical cabinets

3.Electrical Cabinet Cooling Fan✅

Maintenance: Clean dust and remove dirt deposits

Frequency: Once per month

Notes: A total of 3 electrical cabinets on the machine.

4.Paper Collection Table Hydraulic Station✅

Maintenance: Check the 46#–68# hydraulic oil level

Frequency: Once per month

Notes: The oil level must not fall below the red warning line.

5.Hydraulic Power Unit Oil Tank✅

Maintenance: Check the 46#–68# hydraulic oil level

Frequency: Monthly inspection

Notes: The oil level must always remain above the red warning line.

6.Hydraulic Paper Stand Clamp Arm Square Guide Rai✅

Maintenance: Apply lubricating grease

Frequency: Once per week

Notes: Apply grease evenly on all three sides of the guide rail.

7.Conveyor Belt ✅

Maintenance: Check whether the belt is slipping or misaligned

Frequency: Once per week

Notes: Adjust or replace immediately if any issues are found.

8.Check wear condition of bearings in the transmission parts ✅

Maintenance: Check for abnormal noise or excessive heat generation

Frequency: Once every 3 days

Notes: Replace in time if any abnormalities are found, especially the main drive shaft of the conveying section.